Drying equipment

ZLG Series vibration fluid-bed dryer

Bookmark and Share
  • Raw material is heated evently and heat exchange is fully used and dry capacity is high. Compared with ordinary drier, the energy can be saved about 30%.
  • The vibration is created by motor. It is stable in operation and convenient in maintenance, low noise and long life.
  • The fluidezed state is stable and no dead angle and phenomenon of broken out;
  • It is good in regulation and wide in suitablity. The thinckness of raw material layer and movable speed insode the machine and the amlitude can be adjusted through continous variable speed.
  • It is small for damaging the surface of raw material. The equipment can be used for drying raw materials that are easy broken. The drying effect can not be affected even if raw materials have anomaly shape;
  • It is effective to prevent from cross pollution between raw material and air because the quipment adapts fully closed structure. The environment of operation is clean.

Helpful Resources:

Related Links

Principle

Raw material is fed into the machine from the inlet and moves forward continuously along with the level of fluidized-bed under the action of vibration. The hot air passes through fluidized-bed and carries out heat exchange with damp raw material. Then the damp qir is exhausted out through cyclone separator and duster the dry raw material is discharged through discharge outlet.

Application

  • Pharmaceutical and chemical industries: all kinds of press table and granule, boric acid, borax, dihydroxybenzene, malic acid, maleic acid and so on;
  • Foodstuff and constroction material industries: less, monosodium glutamate, edible sugar, edible salt, mine residue, bean, seeds and so on;
  • It can also used for raw materials to add up damp or cooling so on.

Technical Parameter

MODEL Area of Fluid bed (m2) Temperature of inlet air(℃)  Temprature of outlet (℃) Capacity to vapor moisture (kg/h) Vabration
Model Power (kW)
ZLG3×0.30 0.9 70-140 40-70 20-35 ZDS31-6 0.8×2
ZLG4.5×0.30 1.35 70-140 40-70 35-50 ZDS31-6 0.8×2
ZLG4.5×0.45 2.025 70-140 40-70 50-70 ZDS32-6 1.1×2
ZLG4.5×0.60 2.7 70-140 40-70 70-90 ZDS32-6 1.1×2
ZLG6×0.45 2.7 70-140 40-70 80-100 ZDS41-6 1.5×2
ZLG6×0.60 3.6 70-140 40-70 100-130 ZDS41-6 1.5×2
ZLG6×0.75  4.5 70-140 40-70 120-140 ZDS42-6 2.2×2
ZLG6×0.9 5.4 70-140 40-70 140-170 ZDS42-6 2.2×2
ZLG7.5×6.0 4.5 70-140 40-70 130-150 ZDS42-6 2.2×2
ZLG7.5×0.75 5.625 70-140 40-70 150-180 ZDS51-6 3.0×2
ZLG7.5×0.9 6.75 70-140 40-70 160-210 ZDS51-6 3.0×2
ZLG7.5×1.2 9 70-140 40-70 200-260 ZDS51-6 3.0×2

© CONOVAL INC. All rights reserved.